What are the maintenance and cleaning methods for Skip Bins?

2022-10-10 01:33:24

Although the Skip Bin is made of stainless steel, the liner is mostly made of galvanized sheet. If the trash can is in a humid environment for a long time, the liner will rust and rot after a period of time. Therefore, in order to make the trash can serve for a long time, it should be kept in a relatively dry environment as far as possible.

Although the surface of the Skip Bin can resist the corrosion of most substances, if the salt, concentrated acid and leftovers stick on the steel surface for a long time, the body of the trash can may turn yellow and black and cannot be repaired. Therefore, the Skip Bin should be cleaned and replaced as often as possible to ensure that its surface is as smooth as new.

In general, skip bins can maintain the natural uniform luster of metal, and are easy to clean. However, many people are puzzled that finger prints often appear where one finger has touched, and it is not easy to wipe them off. When viewed along the side of the light, the marks on the barrel are very ugly. For the sanded stainless steel surface, the author provides a small door stealing method to remove the finger prints. The oil stains are: apply Shuangfei powder on the surface of the barrel, After pressing ordinary cleaning cloth on the powder for one minute, wipe the powder off with a dry cloth, and the surface of the Skip Bin is as fresh as new But for the mirror stainless steel material, it must not be wiped with a cleaning cloth, otherwise the whole bucket will become irretrievably scarred. At this time, it should be gently wiped with a clean cotton soft cloth, so that the surface of the garbage can be restored to its original state.