What is the production process of Waste Skip Bins?

2022-09-21 03:18:29

Dustbin manufacturer: In one step, the sheet metal workers in the workshop cut the board into the required size specifications according to the drawings. When cutting, it should be isolated from the feeding bracket, and the hopper should also be covered with rubber pads to prevent scratches.

Plasma cutting: After plasma cutting, the slag should be clean. When batch cutting, the completed parts should be cleaned up in time to prevent the contamination of the workpiece by cutting slag.

Saw cutting: When sawing and cutting, the clamping should be protected by rubber, and the oil and sediment on the workpiece should be cleaned after sawing.

The stainless steel dustbin should also be protected during machining, and the oil, iron filings and other impurities on the surface of the workpiece should be cleaned after the operation.

Next, sheet metal workers bend the cut plates. In the process of rolling and bending, corresponding measures should be taken to prevent scratches and creases on the surface of the stainless steel dustbin.

It is welded and formed by the welder according to the drawing requirements. garbage bin manufacturers: Oil, rust, dust and other impurities must be carefully removed before welding. When welding, use argon arc welding as much as possible, and use small current and fast welding when using manual arc welding to prevent swinging. It is forbidden to strike the arc in the non-welding area, and the ground wire is in an appropriate position and the connection is firm to prevent the arc from being scratched. Take anti-spatter measures when welding. After welding, use a stainless steel flat spatula to clean slag and spatter. Dustbin manufacturer: After that, the grinder smoothes the welding points on the welding parts. After passing the process, the product is initially formed. Then through a whole production and processing process, the product is formed. So our stainless steel litter Waste Skip Bins is made.