Product Description
All kinds of Front Load Bins / Rear Load Bins can be designed and manufactured here in Hero Equipment. Usually standard sizes like 1.5 cubic meter, 3 cubic meter and 4.5 cubic meter can be recommended, besides customized bins can also be achieved according to your designs or requirements.
Normally we use Q235 or Q345 as the materials to build the bins, but if you have special requirements on higher grade of steel, we can also source for you.
Regarding the surface treatment, we can paint the bins in your color or in H.D.G. In addition, extra steel lids and casters can also be provided here, we welcome you to contact us for more information.
Product Parameters
Product Name
| Fork bin & Front load Bin |
Material | Mild steel , in China we usually use Q235, which is similar to grade 250 in Australia, we can also use Q345 which is similar to grade 350 in Australia This gives you amazing value through greatly increased product life. |
Thickness of plates used | Customized thickness of plates are available based on your requirements |
Options | 1). Customized RHS or PFC are used for top rails. 2). Forklift pockets under floor. 3). Drain holes on the floor plate 4). Full welding or Flat pack are both available. 5).Prefabricated with top coat finished 6).Prefabricated and hot dipped galvanized 7).Other requirements like sizes,thickness of plates,different steel grade, etc. 8). Casters are available 9). plastic lids are available 10). Logos & amp ; Images |
Painting | We will paint each bin you order in your company colours, enhancing your company image with great looking bins. Two times of primer + two times of top coat Primer : zinc-based epoxy (Grey) Top coat : Urethane (Any color) |
Product Details
Side Pockets
——
Our side pockets can be welded or bolted onto the front load bins, which means they will be supplied in either way you like. Usually if you get the bins in hot dipped galvanized. we suggest you ordering them in "bolted" type.
Casters
——
We can supply you a full set of casters, which should be two fixed and two swivel ones. Steel or steel with PU outside casters can be supplied.
Plastic Lids
——
Different colorful plastic lids can be supplied. And we can supply samples for your inspection.
Product Application
Skip Bins are commonly used to hold open-topped loads of construction and demolition waste or other waste and litter types, fitted with user friendly drop down wheel barrow door for ease of access. building supplies can be delivered to a site in a skip that is later used to remove waste. skip bins are also used for various cleaning-out jobs that need much material to be taken away, and at factories producing large quantities of scrap metal. The material in the skip may be taken to a landfill, recycled or recovered/disposed of in some other way.
Our Factory
Our Certificates
For more information : sale@heroeq.com
FAQ
1、Q: Are you a factory or trading company?
A: We are a factory with exporting license.
2、Q: Where is your factory located? How can I visit it?
A: Our factory is located in Yangzhou City, Jangsu Province, China, which is about 350 kms far from Shanghai. You can take the high-speed rail from Shanghai to Yangzhou, we can pick you up there. And there are other ways to come to our company, we can talk more talk if you can contact us. In one word, we can do more to make it easier to visit us.
3、Q: What does your factory do regarding quality control?
A: 1) All raw material we used are environmental-friendly;
2) Skilled workers are used in crucial production process
3) Quality Control Department will check all process like raw material, cutting sizes, parts welding, fully welding and the finished products to make sure they can meet the quality.
4、Q: What service can I get from Hero Equipment (Yangzhou ) Co.,Ltd ?
A: 1) Quick responses with full attention within 24 hours.
2) Customized bins are accepted.
3) Updated production status
4) Short delivery time: some orders can be finished within 15 days, but usually within 30 days.
5) Service before and after sales.
5、Q: Can you design for us?
A: Yes, we can. We have our Tech Dpt.. We can customized design and produce the bins as per customer's requirement.
6、Q: What is your terms of payment?
A: Usually we need 30% as deposit, and balanced will be paid after sending you the scanned copy of documents like B/L, Invoice packing list and so on.
Phone